"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结富钙物的一正交矿物,具有方解石的两态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了物偏析和粗大的问题，但其工艺复杂，成本过，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一含微量(0.015%)的镍基单合金在热处理和持久过程的物演机制以及各物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催剂可以分为两类,过渡金属双功能催剂和过渡金属氮物、物和氧物催剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、界物以及沿界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结富钙的一种正交矿,具有方解石的两种态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了偏析和粗大的问题，但其工艺复杂，成本过，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)的镍基温合金在热处理和持久过程的演机制以及各种对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，及夹杂较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催剂可以分为两类,过渡金属双功能催剂和过渡金属氮、和氧催剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、界以及沿界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其工艺，本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集生，该马氏体含量比较大，碳化物及夹物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结碳化物的一种正交矿物,具有方解石的两种态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单高温合金在热处理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金能催化剂和过渡金氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、界碳化物以及沿界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

晶富钙碳物的一种正交晶矿物,具有方解的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳物演机制以及各种碳物对合金持久性的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，碳物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构剂可以分为两类,过渡金属双功剂和过渡金属氮物、碳物和碳氧物剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

章认为，粗大的马氏体组织、晶界碳物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

果证明，机用锯条的分齿压痕、基体碳物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的问题，但其杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处，处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析粗大的问题，但其工艺复杂，成本高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理持久程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化可以分为两类,渡金属双功能催化渡金属氮化物、碳化物碳氧化物催化。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳的一种正交晶,有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳演机制以及各种碳对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处马氏体含量比较大，碳及夹杂较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构可以分为两类,过渡金属双功能和过渡金属氮、碳和碳氧。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基体碳状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。

"aragonite: an orthorhombic mineral form of crystalline calcium carbonate, dimorphous with calcite."

文石结晶富钙碳化物的一种正交晶矿物,具有方解石的两种晶态。

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决了碳化物偏析和粗大的，其工艺复杂，成本过高，应用受到限制。

Transformation mechanism of carbides and their effect on the stress rupture property were investigated in a Ni-base single crystal superalloy with microcontent of carbon.

研究了一种含微量(0.015%)碳的镍基单晶高温合金在热处理和持久过程的碳化物演化机制以及各种碳化物对合金持久性能的影响。

The crack initiates at stress concentration point in the root of weld, where has much more martenite, carbide and inclusion, and the serious hydrogen segregation.

裂纹均在焊缝根部应力集处萌生，该处含量比较大，碳化物及夹杂物较多，氢的偏聚现象严重。

The catalysts on studying can divide into two kinds: the transition metal bifunctional catalysts and the nitride, carbide and oxycarbide catalysts of transition metals.

目前,正丁烷脱氢异构催化剂可以分为两类,过渡金属双功能催化剂和过渡金属氮化物、碳化物和碳氧化物催化剂。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使不锈钢产生裂纹的主要原因。

It is proved that the pressmark of tooth root, the state of carbide and remanentelements in the material have different effects on the toughness of POwer hacksaw blades.

结果证明，机用锯条的分齿压痕、基碳化物状况以及材料的残存元素等对机用锯条的韧性有不同程度的影响。