Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面镜折反射全视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼透镜消除离像散的非球面化模式。

Concentric spheres are parallel.

同心球面是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超球面支持量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受心还球面滚子承，降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对面镜折反射全向视觉系统某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离像散面化模式。

Concentric spheres are parallel.

同心面是平行。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超面支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消差方法检验凸二次面实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还面滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形面件时不起皱成形极限与板厚关系曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应化范围常用应椭方程和应椭面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在面坐标系下端部几个主要角度计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有对称锥过渡环壳面舱壁结构组成、受工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了面有限点集伪对称性可以完全由其特征多项式根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面镜折反射全向视觉系统的某些理论问题进行了。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

文高屈光度眼用透镜消除离像散的非球面化模式。

Concentric spheres are parallel.

同心球面是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

文提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭球方程和应力椭球面。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

文证明了球面有限点集的伪对称性可以完全由其特征多项式的根刻画，并得到了在度量加运算下伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面射全向视觉统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透消除离像散的非球面化模式。

Concentric spheres are parallel.

同心球面是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

统分析了带有非对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对镜折反射全向视觉系统的某些理论问题进行了究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

究高屈光度眼用透镜消除离像散的非化模式。

Concentric spheres are parallel.

同心是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

提出了模糊超支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消差方法检验凸二次非的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形件时不起皱成形极限与板厚的关系曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭方程和应力椭描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

介绍了定子线圈胶化模在坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非对称锥过渡环壳的舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

证明了有限点集的伪对称性可以完全由其特征多项式的根刻画，并得到了在度量加运算下伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面镜折反射全向视觉系统的某些理论问题进行了研。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研光度眼用透镜消除离像散的非球面化模式。

Concentric spheres are parallel.

同心球面是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关系曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全的变化范围常用球方程和球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非对称球锥过渡环壳的球面舱壁的结构组成、受工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对面镜折反射全向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜除离像散的非面化模式。

Concentric spheres are parallel.

同心面是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超面支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自方法检验凸二次非面的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还面滚子承，可降低能30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

模拟得到了带孔网板和无孔板成形面件时不起皱成形极限与板厚的关系曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭方程和应力椭面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在面坐标系下端部几个主要角度的计算公式以及推导程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非对称锥渡环壳的面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球面射全向视觉统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透消除离像散的非球面化模式。

Concentric spheres are parallel.

同心球面是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了模糊超球面支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球面的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过模拟得到了带孔网板和无孔板成形球面件时不起皱成形极限与板厚的关曲线。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

全应力的变化范围常用应力椭球方程和应力椭球面来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子线圈胶化模在球面坐标部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

统分析了带有非对称球锥过渡环壳的球面舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优化与稳定性优化。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球面有限点集的伪对称性可以完全由其特征多项式的根来刻画，并得到了在度量加运算伪对称性具有封闭性.

Some important theoretical issues of catadioptric omnidirectional systems for the spherical mirror are researched.

摘要对球镜折反射向视觉系统的某些理论问题进行了研究。

In this paper, model of aspherisation for higher-dioptry spectacle lens is investigated.

本文研究高屈光度眼用透镜消除离像散的非球式。

Concentric spheres are parallel.

同心球是平行的。

In this paper,a fuzzy hypersphere support vector machine(FHS-SVM) landmine detector was proposed.

本文提出了糊超球支持向量机(FHS-SVM)地雷检测器。

The convex aspheric surface has self-aplanatic capability.The range that can be utilized in practice was studied.

分析了自消球差方法检验凸二次非球的实际可用范围。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球滚子承，可降低能耗30%。

A non-wrinkling limited graph for spherical surface parts of retiary metal sheet and metal sheet is obtained.

通过拟得到了带孔网板和无孔板成形球件时不起皱成形极限与板厚的关系曲。

Isoperimetric inequality for sphere and ellipsoid is discussed, and the isoperimetric inequality of some region satisfying certain conditions is given.

力的变范围常用力椭球方程和力椭球来描述。

Calculating formulas and derived process of main angles of stator coil colloidization model at bottom end of spherical coordinate are introduced.

本文介绍了定子圈胶在球坐标系下端部几个主要角度的计算公式以及推导过程。

In the article we analyse the structure compose,the endure force status,the request of strength and stability on the domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell.

系统分析了带有非对称球锥过渡环壳的球舱壁的结构组成、受力工况、强度与稳定性要求,用有限元方法对各参数进行了强度优与稳定性优。

In this paper, we show that the Pseudo-Symmetric property of spherical point set can be characterized by the eigen values of eigenpolynomial and it has the closeness under the metric sum operation.

本文证明了球有限点集的伪对称性可以完由其特征多项式的根来刻画，并得到了在度量加运算下伪对称性具有封闭性.