Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使力模型更好的逼近涡轮发机，应用成熟的非均匀B样条来拟合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

使用大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非定常可压缩过流及其相关的声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对压料装置的结构及系统,以及压料装置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以测量原理实现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独特的后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰特性分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反锥被压出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使热力模型更好的逼近涡轮发机，应用成熟的非均匀B样条来拟合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

使用大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非定常可压及其相关的声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对压料装置的结构及统,以及压料装置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以测量原理实现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独特的签字后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰特性分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通压力排放的反锥被压出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要气动热力模型更好的逼近涡轮发动机，应用成熟的非均匀B样条来拟合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

用大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非定常可压缩过流及其相关的气动声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立气动潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对气动压料装置的结构及气动系统,以及气动压料装置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以气动测量原理实现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认，独特的气动签字，的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立一个适合于直升机旋翼尾迹结构及桨-涡干扰气动特性分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反气动锥被压出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使气动热力模型更好逼近涡轮发动机，应用非均匀B样条来拟合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

使用大涡模拟-声学比拟相结合法,研究三维开式空腔非定常可压缩过流及其相关气动声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模法,建立了气动潜孔击器概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对气动压料装置结构及气动系统,以及气动压料装置在槽机上应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以气动测量原理实现外圆磨削在线无损测法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他同事们认为，独特气动签字后，蝙蝠翅膀所造不同机械操作，在upstrokewingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰气动特性分析法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏第三部分，淤泥上残余水份通过压力排放反气动锥被压出来，形最低厚度泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了气动热力模型更好的逼近涡轮发动机，应用成熟的非均匀B样条来拟合部件。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

用大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非定常可压缩过流及其相关的气动声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了气动潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对气动压料装置的结构及气动系统,以及气动压料装置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以气动测量原的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独的气动签字后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰气动分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反气动锥被压出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使热力模型更好的逼近涡轮发机，应用成熟的非均匀B样条来拟合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

使用大涡模拟-学比拟相结合的方法,研究三维开式空腔的非定常可缩过流及其相关的学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了潜孔击器的概念模型、配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对置的结构及系统,以及置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以测量原理实现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独特的签字后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰特性分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过力排放的反锥被出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使动热力模型更好的逼近涡轮发动机，应用成熟的非均匀B样条来拟合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

使用大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非压缩过流其相关的动声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了动潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对动压料装置的结构动系统,动压料装置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种动测量原理实现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独特的动签字后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构桨-涡干扰动特性分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反动锥被压出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了气动热力模型更好的逼近涡轮发动机，应成熟的非均匀B样条来拟合部件特。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非定常可压缩过流及其相关的气动声学问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采智能产品建模的方法,建立了气动潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对气动压料装置的结构及气动系统,以及气动压料装置在槽机上的应。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一种以气动测量现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独特的气动签字后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰气动特分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反气动锥被压出来，形成最低厚度的泥饼状物。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使动热力模型更好的逼近涡轮发动机，应用成熟的非均匀B样条来合部件特性。

Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.

使用大涡模-比相结合的方法,研究三维开式空腔的非定常可压缩过流及其相关的动问题。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品建模的方法,建立了动潜孔击器的概念模型、装配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对动压料装置的结构及动系统,及动压料装置在槽机上的应用。

In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.

本文提出一动测量原理实现的外圆磨削在线无损测控方法。

Spedding and his colleagues think that the unique aerodynamic wake signatures of bat wings are caused by different mechanical operations in the upstroke of the wingbeat.

斯佩丁和他的同事们认为，独特的动签字后，蝙蝠的翅膀所造成不同的机械操作，在upstroke的wingbeat 。

In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.

基于桨叶二阶升力线理论和旋翼自由尾迹模型，本文在第三章建立了一个适合于直升机旋翼尾迹结构及桨-涡干扰动特性分析的方法和模型。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反动锥被压出来，形成最低厚度的泥饼状物。