The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在问题,介绍无铅索氏体化等温热处理
原理和设备。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在问题,介绍无铅索氏体化等温热处理
原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相行为,并讨论了该相析出和长大
动力
规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
论 乳化剂表(界)面张力等温线比较法用于评价乳化剂
乳化能力是可行
。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本热力
过程
量子力
推广,我们可以直接从量子力
去理解热力
。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿快速校准大量
热电偶,路口
提法,可在温多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及等温涡轮燃烧技术,提出了一种改进概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,等温、等热流垂直板,等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒温非绝热固定床反应器广泛应用于强放热反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化温热处理的原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论
该相析出和长大的动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳化剂表(界)面张力温线比较法用于评价乳化剂的乳化能力是可行的。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本的热力学过程的量子力学推广,我们可以直接从量子力学去理解热力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿的快速校准大量的热电偶,路口的提法,可在温多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及温涡轮燃烧技术,提出
一种改进的概括性卡诺循环燃气轮机,通过模型预测分析
其性能,并与传统燃气轮机进行
比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,温、
热流垂直板,
热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒温非绝热固定床反应器广泛应用于强放热的反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化热处理的原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳化剂表(界)面张力线比较法用于评价乳化剂的乳化能力是可行的。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通对一些基本的热力学
程的量子力学推广,我们可以直接从量子力学去理解热力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿的快速校准大量的热电偶,路口的提法,可在多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通
模型预测分析了其性能,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,、
热流垂直板,
热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒非绝热固定床反应器广泛应用于强放热的反应体系。
声明:以上、词性分类均由互联网资源自动生成,部分未经
人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳化剂表(界)面张力等温法用于评价乳化剂的乳化能力是可行的。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本的热力学过程的量子力学推广,我们可以直接从量子力学去理解热力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿的快速校准大量的热电偶,路口的提法,可在温多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及等温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,等温、等热流垂直板,等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒温非绝热固定床反应器广泛应用于强放热的反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体理存在的问题,介绍无铅索氏体
等
理的原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了等过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳剂表(界)面张力等
线比较法用于评价乳
剂的乳
能力是可行的。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本的力学过程的量子力学推广,我们可以直接从量子力学去理解
力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿的快速校准大量的电偶,路口的提法,可在
多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多压缩以及等
涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,等、等
流垂直板,等
流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒非绝
固定床反应器广泛应用于强放
的反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在问题,介绍无铅索氏体化等温热处理
原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了等温过程含稀土高炉渣中石相
结晶行为,并讨论了该相析出和长大
动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳化剂表(界)面张力等温线比较法用于评价乳化剂乳化能力是可行
。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本热力学过程
量子力学推广,我们可以直接从量子力学去理解热力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿快速校准大量
热电偶,路口
提法,可在温多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及等温涡轮燃烧技术,提出了一种改进概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,等温、等热流垂直板,等热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒温非绝热固定床反应器广泛应用于强放热反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在的,
绍无铅索氏体化
温热处理的原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳化剂表(界)面张力温线比较法用于评价乳化剂的乳化能力是可行的。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本的热力学过程的量子力学推广,我们可以直接从量子力学去理解热力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿的快速校准大量的热电偶,路口的提法,可在温多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,温、
热流垂直板,
热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒温非绝热固定床反应器广泛应用于强放热的反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体热处理存在
问题,介绍无铅索氏体
热处理
原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了过程含稀土高炉渣中铈钙硅石相
结晶行为,并讨论了该相析出和长大
动
学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳剂表(界)面张
线比较法用于评价乳
剂
乳
是可行
。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本热
学过程
量子
学推广,我们可以直接从量子
学去理解热
学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿快速校准大量
热电偶,路口
提法,可在
多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气体多变压缩以及涡轮燃烧技术,提出了一种改进
概括性卡诺循环燃气轮机,通过模型预测分析了其性
,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,、
热流垂直板,
热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒非绝热固定床反应器广泛应用于强放热
反应体系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏热处理存在的问题,介绍无铅索氏
温热处理的原理和设备。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。
Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论 乳剂表(界)面张力
温线比较法用于评价乳
剂的乳
能力是可行的。
And then, we make quantum mechanical generalization of some typical thermodynamic processes, such as isothermal process, isochoric process.
通过对一些基本的热力学过程的量子力学推广,我们可以直接从量子力学去理解热力学。
Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.
补偿的快速校准大量的热电偶,路口的提法,可在温多端地带。
Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.
基于气多变压缩以及
温涡轮燃烧技术,提出了一种改进的概括性卡诺循环燃气轮机,通过模型预测分析了其性能,并与传统燃气轮机进行了比较。
Boundary layer theorem, isothermal and isoflux vertical plates, asymmetric isoflux vertical parallel plates of free convection, optimum and maximum channel space will be discussed.
边界层理论,温、
热流垂直板,
热流非对称之垂直两平行板自由对流以及最佳及最大气渠板距将被讨论。
The two dimensional pseudohomogeneous model was often used for the non isothermal, non adiabatic fixed bed reactor that was widely used for the strongly exothermic reactions.
非恒温非绝热固定床反应器广泛应用于强放热的反应系。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。