There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷一次成形新工艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综合分析了杯碗式固定垫实际密封效果差的原因,针对固定垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷一次成形新工艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝合金扁管模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体的动态流变参数和结晶动学过程的变化,间接证实动态出聚合物熔体分子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有冷却系统直或螺旋开槽料套和独特的螺杆设计保证了原料的低温塑化，高速出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面分析,从而使微孔塑料的生产更趋合理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混合原料生产砖瓦的破碎设备，它有两个工作辊子作相反方向旋转，辊子间的粘土受到而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心材在过程中存在的问题，阐述了改进模具的具体措施和生产时的结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用一次成形新工艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综合分析了杯碗式固定垫实际密封效果差的原因,针对固定垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用一次成形新工艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝合金扁管模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体的动态流变参数和结晶动力学过程的变化,间接证实动态出聚合物熔体分子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有却系统直或螺旋开槽加料套和独特的螺杆设计保证了原料的低温塑化，高速出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

却水温等进行了全面分析,从而使微孔塑料的生产更趋合理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混合原料生产砖瓦的破碎设备，它有两个工作辊子作相反方向旋转，辊子间的粘土受到而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心型材在过程中存在的问题，阐述了改进模具的具体措施和生产时的结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷挤一次新工艺 ,效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综合分析了杯碗式固定挤垫实际密封效果差的原因,针对固定挤垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤一次新工艺，效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝合金扁管挤模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体的动态流变参数和结晶动力学过程的变化,间接证实动态挤出聚合物熔体分子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有冷却系统直或螺旋开槽加料套和独特的螺杆设计保证了原料的低温塑化，高速挤出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面分析,从而使微孔塑料的生产更趋合理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混合原料生产砖瓦的破碎设备，它有两个工作辊子作相反方向旋转，辊子间的粘土受到挤而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心型材在挤过程中存在的问题，阐述了改进挤模具的具体措施和生产时的挤结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷一次成形新工艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综合分析了杯碗式固定垫实际密封效果差的原因,针对固定垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷一次成形新工艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝合金扁管模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体的动态流变参数和结晶动力学过程的变化,间接证实动态出聚合物熔体分子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有冷却系统直或螺旋开槽加料套和独特的螺杆设计保证了原料的低温塑化，高速出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面分析,从而使微孔塑料的生产更趋合理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混合原料生产砖瓦的破碎设备，它有两个工作辊子作相反方向旋转，辊子间的粘土受到而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心材在过程中存在的问题，阐述了改进模具的具体措施和生产时的结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷挤压一次成形新工艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综合分析了杯碗式固定挤压垫实际密封效果差,针对固定挤压垫结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝合金扁管挤压模优化设计具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体动态流变参数和结晶动力学过程变化,间接证实动态挤出聚合物熔体分子解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特带有冷却系统直或螺旋开槽加料套和独特螺杆设计保证了料低温塑化，高速挤出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面分析,从而使微孔塑料生产更趋合理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混合料生产砖瓦破碎设备，它有两个工作辊子作相反方向旋转，辊子间粘土受到挤压而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面空心型材在挤压过程中存在问题，阐述了改进挤压模具具体措施和生产时挤压结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷挤压一次形新工 ,显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综合分析了杯碗式固定挤压垫实际密封果差原因,针对固定挤压垫结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤压一次形新工，显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝合金扁管挤压模优化设计具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体动态流变参数和结晶动力学过程变化,间证实动态挤出聚合物熔体分子解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特带有冷却系统直或螺旋开槽加料套和独特螺杆设计保证了原料低温塑化，高速挤出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面分析,从而使微孔塑料生产更趋合理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混合原料生产砖瓦破碎设备，它有两个工作辊子作相反方向旋转，辊子间粘土受到挤压而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面空心型材在挤压过程中存在问题，阐述了改进挤压模具具体措施和生产时挤压结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷挤压一次成新工艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综了杯碗式固定挤压垫实际密封效果差的原因,针对固定挤压垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤压一次成新工艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝金扁管挤压模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过 PET 熔体的动态流变参数和结晶动力学过程的变化,间接证实动态挤出聚物熔体子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有冷却系统直或螺旋开槽加料套和独特的螺杆设计保证了原料的低温塑化，高速挤出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面,从而使微孔塑料的生产更趋理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部混原料生产砖瓦的破碎设备，它有两个工作辊子作相反方向旋转，辊子间的粘土受到挤压而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心型材在挤压过程中存在的问题，阐述了改进挤压模具的具体措施和生产时的挤压结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷挤压一次成艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综分析了杯碗式固定挤压垫实际密封效果差的原因,针对固定挤压垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤压一次成艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝金扁管挤压模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过分析 PET 熔体的动态流变参数和结晶动力学过程的变化,间接证实动态挤出物熔体分子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有冷却系统直或螺旋开槽加料套和独特的螺杆设计保证了原料的低温塑化，高速挤出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面分析,从而使微孔塑料的生产更趋理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部分混原料生产砖瓦的破碎设备，它有两个作辊子作相反方向旋转，辊子间的粘土受到挤压而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心型材在挤压过程中存在的问题，阐述了改进挤压模具的具体措施和生产时的挤压结果.

There are lots of advantages by cold extrusion for straight knurl nut in a single process.

直纹滚花螺母采用冷挤压一次成新工艺 ,成效显著。

The article analyzes the reasion of poor effect for cuppy fixed dummy block in aluminium alloy extrusion press.

综了杯碗式固定挤压垫实际密封效果差的原因,针对固定挤压垫的结构进行了改进。

Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process.

摘 要： 直纹滚花螺母采用冷挤压一次成新工艺，成效显著。

In this paper, formulize concrete measures of optimal design of the extrusion die for a four-cavity thin wall aluminum alloy flat pipe.

阐述了该4腔薄壁铝金扁管挤压模优化设计的具体措施。

The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

通过 PET 熔体的动态流变参数和结晶动力学过程的变化,间接证实动态挤出聚物熔体子的解缠结作用。

Unique straight or spiral grooved feed bush with force cooling system and unique screw ensure high plastification in low temperature, high speed extrusion of material.

独特的带有冷却系统直或螺旋开槽加料套和独特的螺杆设计保证了原料的低温塑化，高速挤出。

Many factors affecting cell nucle ation and cell growth among the extrusion process such as preshaping pressure, melt temperature, melt viscosity, interfa cial tension,take-up speed and the te...

冷却水温等进行了全面,从而使微孔塑料的生产更趋理化。

Double Rollers Crusher is used to crush clunch and partial shales for brick enterprises. It has two rollers to circumrotate in reverse. The clunch between rollers are crushed by extrusion.

双辊破碎普遍用于粘土和部混原料生产砖瓦的破碎设备，它有两个工作辊子作相反方向旋转，辊子间的粘土受到挤压而破碎。

The problems existed in extrusion process of two sorts large section hollow extrusion profilesare introduced. The concrete measure and extrusion consequence of the improved prothole die are given.

介绍了两种大断面的空心型材在挤压过程中存在的问题，阐述了改进挤压模具的具体措施和生产时的挤压结果.