Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量包括眼轴长度，角膜曲率和绝对屈光误差等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性的数学模式，包括压力角、曲率、运动静力，及推导系统输入扭式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面的微不变量,导出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率对通视的限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝对屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程值分方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分学模式，包括压力角分、曲率分、运动静力分，及推导系统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面微分不变量,导出可展面曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力方法来提高覆盖范围并解决地球曲率对通视限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝对屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程值分方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分学模式，包括压力角分、曲率分、运动静力分，及推导系统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面微分不变量,导出可展面曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力方法来提高覆盖范围并解决地球曲率对通视限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝对屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面的微分不变量,出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率对通视的限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通可展曲面的微分不变量,导出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率通视的限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝对屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算了凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，系统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面的微分不变量,出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率对通视的限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝对屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截模型在多种工况下的截曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过曲的微分不变量,导出的曲率线与曲率特征,并以锥和切线曲为阐明这些特性的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率对通视的限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量包括眼轴长度，角膜曲率和绝对屈光误差等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程析方法，计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性析的学模，包括压力角析、曲率析、运动静力析，及推导系统输入扭矩。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面的微不变量,导出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率对通视的限制。

Peak updraft strength is slightly enhanced with hodograph curvature.

山顶上升气流强度随速矢端迹曲率加大而稍有加强。

Efficacy measures include axial length， keratometric power and mean absolute refractive error.

有效测量值包括眼轴长度，角膜曲率和绝对屈光误差值等内容。

The cross-section curvature ductility ratio for R.C inequiaxial T-shaped, L-shaped and cress-shaped columns is calculated by numerical method.

摘要采用非线性全过程数值分析方法，计算了凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built.

且建立凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，系统输入扭矩表示式。

First, the vertexes are sequenced according to their curvature to form a descending order vertex array.The rearer vertex has smaller local curvature.

首先对所有顶点按照曲率大小进行排序，形成按照降序排列的顶点集，顶点越靠后，其周围局部曲率越小。

The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well.

本文通过可展曲面的微分不变量,出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性的几何意义。

An L-band safety remote control system is introduced which is composed of three stations and one center in order to increase coverage and overcome the limit of earth curvature to intervisibility.

本文介绍一种L频段安控系统,它由“三站一中心”组成,用三站无线接力的方法来提高覆盖范围并解决地球曲率对通视的限制。