A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型软件。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的,并对调节器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成了我国即将运行的先进超导托克马克实验装
EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概
研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 s的FUDS实验验证,两个模型最大电压误差分别为电池组额定电压的1.02%和1.39%,精度满足电动汽车系统要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要的冷却剂系统的特点,对系统进行了节点划分,并做了适当简化,以使其适应实时
的需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型仿真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程器实现过程控制系统的仿真,并
器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成功仿真了我国即将运行的先进超导托克马克实装
EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 s的FUDS实,两个模型最大电压误差分别为电池组额定电压的1.02%和1.39%,精度满足电动汽车系统仿真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针要仿真的冷却剂系统的特点,
系统进行了
点划分,并做了适当简化,以使其适应实时仿真的需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的真,并对调节器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成功真了我国即将运行的先进超导托克马克实验装
EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 s的FUDS实验验证,两个最大电压误差分别为电池组额定电压的1.02%和1.39%,精
电动汽车系统
真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要真的冷却剂系统的特点,对系统进行了节点划分,并做了适当简化,以使其适应实时
真的需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型仿真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统仿真,并对调节器
行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成功仿真了我国即将运行导托克马克实验装
EAST
装配方案,并在
变驱动次临界堆FDS-I概念设计研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 sFUDS实验验证,两个模型最大电压误差分别为电池组额定电压
1.02%和1.39%,精度满足电动汽车系统仿真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要仿真冷却剂系统
特点,对系统
行了节点划分,并做了适当简化,以使其适应实时仿真
需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机模
仿真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制仿真,并对调节器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该成功仿真了我国即将运行
先进超导托克马克实验装
EAST
装配方案,并在先进
聚变驱动次临界堆FDS-I概念设计研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 sFUDS实验验证,两个模
电压误差分别为电池组额定电压
1.02%和1.39%,精度满足电动汽车
仿真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要仿真冷却剂
特点,对
进行了节点划分,并做了适当简化,以使其适应实时仿真
需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制系统的,并对调节器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成了我国即将运行的先进超导托克马克实验装
EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概
研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 s的FUDS实验验证,两个模型最大电压误差分别为电池组额定电压的1.02%和1.39%,精度满足电动汽车系统要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要的冷却剂系统的特点,对系统进行了节点划分,并做了适当简化,以使其适应实时
的需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机模型仿真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器实现过程控制的仿真,并对调节器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该功仿真了我国即将运行的先进超导托克马克实验装
EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计
得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 s的FUDS实验验证,两个模型最大电压误差分别为电池组额定电压的1.02%和1.39%,精度满足电动汽车仿真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要仿真的冷却剂的特点,对
进行了节点划分,并做了适当简化,以使其适应实时仿真的需要。
声明:以上例句、词性分类均由互联网资源自动生,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型仿真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程现过程控制系统的仿真,并对
进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成功仿真了我国即将运行的先进超导托克马克装
EAST的装配方案,并在先进的聚变驱动次临界堆FDS-I概念设计研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 s的FUDS证,两个模型最大电压误差分别为电池组额定电压的1.02%和1.39%,精度满足电动汽车系统仿真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要仿真的冷却剂系统的特点,对系统进行了点划分,并做了适当简化,以使其适应
时仿真的需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。
A computerized overall forging system's model including hammerer,air hammer and forging part was developed.
开发了人一空气锤-锻件人机系统模型仿真软件。
Using PMK programing controler simulates of the process control system and corrects parameter of controler in extractive tower.
利用PMK可编程调节器现过程控制系统
仿真,并对调节器进行参数整定。
And virtual assemblies of the Experimental Advanced Superconducting Tokomak device (EAST) and the fusion-driven sub-critical system (FDS-I) are successfully simulated on FVAS.
该系统成功仿真了我国即将运行先进超导托克马克
EAST
方案,并在先进
聚变驱动次临界堆FDS-I概念设计研究中得到应用。
The 1 372s FUDS test results show that the maximum voltage error of these two models are 1.02% and 1.39% of battery pack ...
通过1 372 sFUDS
证,两个模型最大电压误差分别为电池组额定电压
1.02%和1.39%,精度满足电动汽车系统仿真要求。
In order to adapt to real time simulation, the nodes of system and the predigestion was made according to the characteristic of reactor coolant system which will be simulated.
本论文针对要仿真冷却剂系统
特点,对系统进行了节点划分,并做了适当简化,以使其适应
时仿真
需要。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问题,欢迎向我们指正。