The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统稳定性是一个非常重要问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石其它应用，如尖晶石承等也取得了较大发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在鸣音问题,介绍了改进研究进展,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它核心部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法基础上,对航空发动机角接触球承刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分析方法，可以建立航空发动机角接触球承刚度分析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面分析,并对其材代用和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精研加工工艺加工过程,提高了钢球外观质和表面粗糙度生产效率,使该类承性能和寿命有了进一步提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上地承架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以带闸板位置指示器地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只用于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能方法。

The journal rubs against the bearing surface.

颈在承面摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳的，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统的稳定性是一个非常重要的问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石的其它应，如尖晶石承及颜料等也取得了较大的发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机的典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受双列向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在的鸣音问题,介绍了改进研究的进展,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差的测量和控制是十重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它的核心部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学析方法的,对航空发动机角接触球承刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学析方法，可以建立航空发动机角接触球承的刚度析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面析,并对其材料代和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精研加工工艺及加工过程,提高了钢球的外观质量和表面粗糙度及生产效率,使该类承的性能和寿命有了进一步的提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料的特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

于手轮执行器阀门的地承架可以在方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器的地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只于承受径向负荷，滚子与套圈滚道为线性接触，属向可离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应于超洁净领域的新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能的方法。

The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统稳定性是一个非常重要问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石其它应用，如尖晶石承及颜料等也取得了较大发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机典部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在鸣音问题,介绍了改进进展,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它核心部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法基础上,对航空发动机角接触球承刚度进行了。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分析方法，可以建立航空发动机角接触球承刚度分析模。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面分析,并对其材料代用和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精加工工艺及加工过程,提高了钢球外观质量和表面粗糙度及生产效率,使该类承性能和寿命有了进一步提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上地承架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只用于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域新无承薄片电机为对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能方法。

The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统稳定性是一个非常重要问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

其它应用，如承及颜料等也取得了较大发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在鸣音问题,介绍了改进研究进展,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法基础上,对航空发动机角接触球承刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分析方法，可以建立航空发动机角接触球承刚度分析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面分析,并对其材料代用和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精研加工工艺及加工过程,提高了钢球外观质量和表面粗糙度及生产效率,使该类承性能和寿命有了进一步提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上地承架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只用于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能方法。

The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上的，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统的稳定性是一个非常重要的问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石的其它应，如尖晶石承及颜料等也取得了较大的发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机的典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机件、盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在的鸣音问题,介绍了改进研究的进展,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差的测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它的核心部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法的基础上,对航空发动机角接触球承刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分析方法，可以建立航空发动机角接触球承的刚度分析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面分析,并对其材料代和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精研加工工艺及加工过程,提高了钢球的外观质量和表面粗糙度及生产效率,使该类承的性能和寿命有了进一步的提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料的特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

于手轮执行器阀门上的地承架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器的地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应于超洁净领域的新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能的方法。

The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统稳定性是一个非常重要问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石其它应用，如尖晶石承及颜料等也取得了较大。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在鸣音问题,介绍了改进研究进,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工,承孔位置误差测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它核心部件，转子系统运行可能出现不平衡、不对、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法基础上,对航空动机角接触球承刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通拟静力学分析方法，可以建立航空动机角接触球承刚度分析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面分析,并对其材料代用和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通改进超精研加工工艺及加工,提高了钢球外观质量和表面粗糙度及生产效率,使该类承性能和寿命有了进一步提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上地承架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只用于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能方法。

The journal rubs against the bearing surface.

颈在面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上的，将顶部出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运部分采用高精度直线运副,组精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩转子系统的稳定性是一个非常重要的问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石的其它应用，如尖晶石及颜料等也取得了较大的发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、、联器、齿轮箱是抄纸的典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发缸体、缸盖、盖、涡轮增压器壳体、排汽歧管、柴油发铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主受用双列向心还球面滚子，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶存在的鸣音问题,介绍了改进研究的进展,提出改进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,孔位置误差的测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它的核心部件，转子系统运行过程中可能出现不平衡、不对中、损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法的基础上,对航空发接触球刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分析方法，可以建立航空发接触球的刚度分析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球受力情况和损伤形式作了全面分析,并对其材料代用和结构改进方案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精研加工工艺及加工过程,提高了钢球的外观质量和表面粗糙度及生产效率,使该类的性能和寿命有了进一步的提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料的特点，选择了氮化硅陶瓷作为有硅室温胶搅拌釜底并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上的地架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器的地架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子一般只用于受径向负荷，滚子与套圈滚道为线性接触，属向可分离型。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域的新型无薄片电为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑非牛顿三维热流体力润滑性能的方法。

The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上的，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统的稳定性是一个非常重要的问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石的其它应用，如尖晶石承及颜料等也取得较大的发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机的典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在的鸣音问题,介进研究的进展,提出进方法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差的测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它的核心部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分析方法的基础上,对航空发动机角接触球承刚度进行研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分析方法，可以建立航空发动机角接触球承的刚度分析模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作全面分析,并对其材料代用和结构进方案进行可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过进超精研加工工艺及加工过程,提高钢球的外观质量和表面粗糙度及生效率,使该类承的性能和寿命有进一步的提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述氮化硅陶瓷材料的特点，选择氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上的地承架可以在上方对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器的地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只用于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域的新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出一种求解径向滑动承非牛顿三维热流体动力润滑性能的方法。

The journal rubs against the bearing surface.

颈在承面上摩擦。

Unclamp the shaft from the vise and slide off the top bearing.

松开老虎钳上的，将顶部承移出。

High processing accuracy due to superprecision linear motion pair adopted in moving parts.

运动部分采用高精度直线承运动副,组角精度高。

The stability of turbocompressor rotor bearing system is a very important problem.

透平压缩机转子承系统的稳定性是一个非常重要的问题。

The development and application of raw minerals and products of spinels are also briefly introduced.

尖晶石的其它应用，如尖晶石承及颜料等也取得了较大的发展。

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

辊子、承、联器、齿轮箱是抄纸机的典型部件。

Gas Engine Block, Engine Head, Bearing Cap, Turbo-charge Housing, Manifold Exhaust, Diesel Engine Parts, Slotware.

产品/Product：汽车发动机缸体、缸盖、承盖、涡轮增压器壳体、排汽歧管、柴油发动机铸件、槽盘。

Using biserial roller axletree with centripetal spherical support of the host axletree can reduce energy consumption by 30%.

主承受用双列向心还球面滚子承，可降低能耗30%。

The question of spirant and the development are also recommanded, and then the improved method is discussed.

针对橡胶承存在的鸣音问题,介绍了改进研究的进展,提出改进法。

It is very important to measure and control the position of bearing hole when machining canular forked shaft.

在叉头套加工过程中,承孔位置误差的测量和控制是十分重要。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它的核心部件，转子系统运行过程中可能出现不平衡、不对中、承损坏等故障。

On the basis of traditional quasistatic analytical method, stiffness for angular contact ball bearing of aeroengine is studied.

在传统拟静力学分法的基础上,对航空发动机角接触球承刚度进行了研究。

The analytical model of stiffness for angular contact ball bearing of aeroengine is established by the quasistatic analytical method.

通过拟静力学分法，可以建立航空发动机角接触球承的刚度分模型。

This paper analyses fully the applied force and damage types of self-aligning bearings of hydrofoil kingpost .

本文就水翼船翼柱自位球承受力情况和损伤形式作了全面分,并对其材料代用和结构改进案进行了可行性论证。

By way of improving the superfinishing process,the appearance quality and surface roughness of steel balls,together with the productivity,were increased.

通过改进超精研加工工艺及加工过程,提高了钢球的外观质量和表面粗糙度及生产效率,使该类承的性能和寿命有了进一步的提高。

Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅陶瓷材料的特点，选择了氮化硅陶瓷承作为有机硅室温胶搅拌釜底承并进行了相应设计。

A floorstand for handwheel actuated valves allows operation from above.Included is handwheel, non-rising stem, fittings, extension, and floorstand with gate position indicator.

用于手轮执行器阀门上的地承架可以在上对阀门进行操作，包括手轮，暗杆，连接件，加长件，以及带闸板位置指示器的地承架。

In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.

圆柱滚子承一般只用于承受径向负荷，滚子与套圈滚道为线性接触，属向可分离型承。

A dynamic model of passive suspension in the bearingless slice motor system is developed,based on the principles of geostatics and mechanics of gyroscope.

以应用于超洁净领域的新型无承薄片电机为研究对象。

Taking power law index non-Newtonian fluid as an example, a method of solving non-Newtonian three dimensional thermohydrodynamic lubrication of journal bearing is introduced.

以幂率流体为例，提出了一种求解径向滑动承非牛顿三维热流体动力润滑性能的法。