The mixture is fed into the cylinder from the carburetor.

混合体由汽化器注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括了三种形式，即传导、对流和汽化潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此合适的进样衬管、汽化温度、进样技术（推荐使用快速自动进样）、溶剂、色谱柱安位置和分流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入汽化室后，在压下注射器柱塞杆之，起高沸点组分的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术器不但具有切割、汽化和凝固的特性，而且具有在切割和汽化的同时凝固血管的优点。

The mixture is fed into the cylinder from the carburetor.

混合体由汽化器注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括了三种形式，即传导、对流汽化潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适的进样衬管、汽化温度、进样技术（推荐使用快速自动进样）、溶剂、安位流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入汽化室后，在压下注射器塞杆之前，会引起高沸点组的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术器不但具有切割、汽化凝固的特性，而且具有在切割汽化的同时凝固血管的优点。

The mixture is fed into the cylinder from the carburetor.

混合体由器注入。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

移则主要包括了三种形式，即传导、对流潜。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适的进样衬管、温度、进样技术（推荐使用快速自动进样）、溶剂、色谱柱安位置分流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入室后，在压下注射器柱塞杆之前，会引起高沸点组分的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术器不但具有切割、凝固的特性，而且具有在切割的同时凝固血管的优点。

The mixture is fed into the cylinder from the carburetor.

混合体由汽化器注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括了三种形式，即传导、对流和汽化潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适的衬管、汽化温度、技术（推荐使用快速自动）、剂、色谱柱安位置和分流件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入汽化室后，在压下注射器柱塞杆之前，会引起高沸点组分的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术器不但具有切割、汽化和凝固的特性，而且具有在切割和汽化的同时凝固血管的优点。

The mixture is fed into the cylinder from the carburetor.

混合体由器注缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括了三种形式，即传导、对流和潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适的进衬管、温度、进（推荐使用快速自动进）、溶剂、色谱柱安位置和分流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插室后，在压下注射器柱塞杆之前，会引起高沸点组分的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手器不但具有切割、和凝固的特性，而且具有在切割和的同时凝固血管的优点。

The mixture is fed into the cylinder from the carburetor.

混合体由汽化注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括了三种形式，即传导、对流和汽化潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适衬管、汽化温度、技术（推荐使用快速自动）、溶剂、色谱安位置和分流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射针尖插入汽化室后，在压下注射杆之前，会引起高沸点组分损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术不但具有切割、汽化和凝固特性，而且具有在切割和汽化同时凝固血管优点。

The mixture is fed into the cylinder from the carburetor.

混合体由汽化器注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括了三种形式，即传导、汽化潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适进样衬管、汽化温度、进样技术（推荐使用快速自动进样）、溶剂、色谱柱安位置分比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入汽化室后，在压下注射器柱塞杆之前，会引起高沸点组分。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术器不但具有切割、汽化凝固特性，而且具有在切割汽化同时凝固血管优点。

The mixture is fed into the cylinder from the carburetor.

混合体由汽化器注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

转移则主要包括了三种形式，即传导、对流和汽化。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

此应选择合适的进样衬管、汽化温度、进样技术（推荐使用快速自动进样）、溶剂、色谱柱安位置和分流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射器针尖插入汽化室后，在压下注射器柱塞杆之前，会引起组分的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手术器不但具有切割、汽化和凝固的特性，而且具有在切割和汽化的同时凝固血管的优。

The mixture is fed into the cylinder from the carburetor.

混合体由汽化注入汽缸。

Heat transfer was formulated to include effects of conduction, convection and latent heat of vapourization.

热转移则主要包括形式，即传导、对流和汽化潜热。

It is therefore important to select the appropriate inlet liner, inlet temperature, injection technique (fast autoinjection is recommended), solvent, column installation and split ratio.

因此应选择合适的进样衬管、汽化温度、进样技（推荐使用快速自动进样）、溶剂、色谱柱安位置和分流比等条件。

Vaporisation from the needle on initial entryof the syringe into the injector, before the syringe plunger is depressed, can result in partial loss of high boiling components.

当注射针尖插入汽化室后，在压下注射柱塞杆之前，会引起高沸点组分的损失。

The results showed that the scalpel has the properties of cutting,vaporization and coagula tion,and its advantage allows it to cut and vaporize brain tissue and coagulate vessels simutaneously.

结果表明本手不但具有切割、汽化和凝固的特性，而且具有在切割和汽化的同时凝固血管的优点。