The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息开发业一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

研制中，提出并实现了集筑模器-结构分析器-仿真演示器一体的三器一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

此基础上，探讨了基地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息系统开发业务的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统制中，提出并实现集筑模器-结构分析器-仿真演示器的三器化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨在基地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出斜航式法向圆弧螺旋锥齿轮的模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息系统开业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现集筑模器-结构分析器-仿真演示器于一体的三器一体的筑工程辅助设计和软件开思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开材铺设的分割和编号、材的艺术拼花、材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨在基于地质观测据、钻孔据、平面图据、剖面图据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚加工时的工件端面切削及“飞切”加工进行仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺轮数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管理ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息系统开发业务于一体综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模方法,立了气动潜孔冲击器概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构分析器-仿真演示器于一体三器一体化筑工程辅助计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发了石材铺数化分割和编号、石材艺术拼花、石材加工信息在不同软件中通信即加工单开立、以及转楼梯扶手石材贴片空间曲线模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集空摄影、测、真实三维模地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑工程辅助设计软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析开发了石材铺设的参数化分割、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模和地理信息系统开发业务于一体的综合地理信息生商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能模的方法,立了气动击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前空摄影、测、实三维模和地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了筑模器-结构分析器-示器于一体的三器一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目前是集航空摄影、航测、真实三维模地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了集筑模器-结构分析器-仿真演示器于一体的三器一体化的筑工程助计软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析开发了石材铺的参数化分割编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿真模。

The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented.

给出了斜航式法向圆弧螺旋锥齿轮的参数化模方法。

This paper, we study building model language-UML, building model tool-UNIFACE, and ABC analyzing method for stock management.

对统一模语言UML、最新模工具软件UNIFACE和立库存管理的ABC分析法进行了研究。

Redbird is a comprehensive GIS manufacturer that specializes in aerial photography, map making, true three-dimensional modelling and GIS development.

目航空摄影、航测、实三维模和地理信息系统开发业务于一体的综合地理信息生产商。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产品模的方法,立了气动潜孔冲击器的概念模型、装配模型和零件模型。

A new clue for architectural CAD and software design is proposed during the developing procedure, which is called three-moduler-in-one method.

在系统研制中，提出并实现了筑模器-结构分析器-仿器于一体的三器一体化的筑工程辅助设计和软件开发思路。

Amongwhile the fuction of pavage segment and numbering of laying stone can automaticcomplete according to the laying area to choose the best program.

该系统中，着重分析和开发了石材铺设的参数化分割和编号、石材的艺术拼花、石材加工信息在不同软件中的通信即加工单的开立、以及旋转楼梯扶手石材贴片空间曲线的模等几个功能模块。

On basis of this model, the modeling methods and modeling flow were discussed based on data source of geological observation, drillhole, ichnography and section map.

在此基础上，探讨了在基于地质观测数据、钻孔数据、平面图数据、剖面图数据的断层模方法和模流程。

Starting with the basic equation of the hydraulic system this paper deals with the mechanism modeling for double triangle boom luffer and its hydraulic system.

从液压系统的基本方程入手，对双三角钻臂变幅机构进行了机理模。

Based on machine kinematics and cutting theories, the simulating method for the generation of three-dimensional surfaces in face turning and flycutting of SPDT is studied.

基于机床运动学和切削理论对单点金刚石加工时的工件端面切削及“飞切”加工进行了仿模。